| Application |
Medium torque, general duty, positive drive belt. Requires belt length adjustment for tensioning. |
| Operating speed |
75m/sec
15,000 feet/min |
| Nominal thickness |
0.76mm
0.030inch |
| Minimum pulley diameter |
13mm
0.5 inch |
| Average tensile strength |
263 N/mm
1,500 lbs./inch |
| Saturant stock |
Brown, abrasion resistant neoprene |
| Permanently antistatic |
No |
| Non-marking properties |
Excellent |
| General oil resistance |
Excellent |
| Friction surfaces |
Inside: Smooth
Outside: Smooth |
| Installation |
Either surface to pulley |
| Cord construction |
Polyester (woven endless) |
| Available widths (wider, request
information) |
to 127mm
to 5 inches |
| Available lengths |
178 to 5080 mm
7 to 200 inches |
| Stock length increments |
178 to 1524mm --- 13 mm increments
>1524 to 3937mm --- 25 mm increments
>3937 to 5080mm --- mfgd. to order
7 to 60 inches --- 0.5 inch increments
>60 to 155 inches --- 1 inch increments
>155 to 200 inches --- mfgd. to order
|
| Standard taut length tolerances |
<508mm = ±1.6 mm
508 to 1270mm = ± 3 mm
>1270 to 3937mm = ± 6 mm
>3937 to 5080 mm = ± 10 mm
<20 in. = ±0.063 inch
20 to 50 in. = ± 0.125 inch
>50 to 155 in. = ± 0.250 inch
>155 to 200 inch = ± 0.375 inch
|
| Shaft load for 0.5% belt elongation |
14 N/mm
80 lbs./inch |
| Continuous operating temperature |
-23°C to 107°C
-10°F to 225°F |
